Motormate 12V-24V 20 Amp Voltage Booster

Motormate 12v-24v 20 Amp Voltage Booster Ideal For Any Situation Where A 12v Dc Power Source Needs To Be Stepped Up To A 24v Power Source. The Ipc-1220 Has Regulated Output And Is Current Limiting. The Output Is A Pre-set 27.6v That Can Be Adjusted, The Current Is At Maximum When It Is Required And Falls Away To A Minimum When Required. This Means Is That The Unit Can Operate Without Damaging Voltage Sensitive Loads. Because Of This Feature, The Electroparts Ipc-1220 Can Also Charge Batteries With A Set Voltage Or "single Stage" Output. Once The Ipc-1220 Has Charged The Battery, The Current Limiting Feature Will Reduce The Current To A Trickle Charge And Maintain The Battery While The Converter Is On. A Trigger Wire Can Be Connected To A 12v Source, Such As The Ignition In A Vehicle, And Power On/off The Unit At The Same Time As The Vehicle. This Makes For Easy Operation And Avoids Over Discharge Of The Main Battery Source. This Unit Can Also Be "stacked" The Ipc-1220 Can Be Paralleled With Other Ipc-1220 To Allow For More Current Output. The Ipc-1220 Is Input/output Isolated. Features Suitable For: Motor Homes, Boats, Buses, Trucks, Work Vehicles, Cars, Caravans, Telecommunications, Stereos, Fridges, Lights Etc Suitable For Battery Charging No Radio Interference Parallel Operation Capable Input Remote Switchable Galvanic Isolated Protections: Overload Short Circuit Over Temperature Input/output Isolated Specifications: Input Voltage: 10v-16v Dc Output Current (max): 20 Amp Ripple & Noise: 25mv Rms Line Regulation: 40mv Load Regulation(0-100%): 20mv Efficiency: 90% Dimensions: 280 X 115 X 80mm Weight: 1.9 Kg