An accurate, compact and responsive digital speedometer with over speed alert. No installation or calibration is required. Available in various mounting options to suit.
Powerful Performance
The GPS Speed Alert uses satellites to determine three-dimensional speed and heading independently of the vehicle. No calibration is required for the unit to display correct speed in kilometers per hour or miles per hour.
The user can choose between 3 displays to show speed only, speed and heading or speed heading, position and battery voltage.
The unit contains an internal antenna and the only electrical connection required is via a cigarette lighter plug that can be used in 12V or 24V vehicles.
Speed is displayed on a colour screen; the colour changes from green to red as the user-settable speed-threshold is exceeded. A user selectable buzzer can also be enabled to sound as an over-speed warning.
Please note that the GPS Speed Alert does not change with the local speed zones.
The speed-threshold can be set by the user by pressing the up and down arrows on the keypad. To change the speed unit and to enable and disable the buzzer, the menu key in conjunction with a on-screen menu is used.
The unit is mounted with a flexible windscreen-mount, but can also be attached using any standard camera mount including those available from RAM.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Features
• Speed in km/h, mph or knots
• GPS Speed independent of vehicle
• Can permanently disable position display mode for rallies
• Multi voltage 12/24V and 9-36V input voltage
• Precision of 0.1 km/h
• Internal GPS & GLONASS for highest precision
• Cigarette lighter connection
• Optional buzzer and changes of colour for over speed warning
• Low current draw
• Voltage monitoring of battery
• Multiple mounting options
• User settable speed threshold
Input Voltage | Minimum 9V; Maximum 36V |
Power Consumption | Maximum 1.2W (100mA @ 12V; 50mA @ 24V) |
Acquisition time, power-up | Less than 38s (50% of the time), less than 42s (90% of the time) |
Speed Range | 1km/h - 199km/h |
Resolution Speed | One Unit ( km, knots or miles per hour) |
Resolution Distance | One unit ( meter or feet) |
Operating Temperature | -20-70°C |
Storage Temperature | -30 - 80°C |
Dimensions (Display Unit) | 70mm W x 50mm H x 18mm D |
Weight (g) | 178 |
Antenna Type | Internal Antenna |
Mounting System | Windshield Mount |
Warranty | 2 Years |