Redarc Tow - Pro Elite 12V Electric Brake Controller With Dash Mounted Control Knob
The Tow-Pro Elite 12 is suitable for 12-volt applications only, and is the only real choice when it comes to electric braking for your caravan or trailer: REDARC Tow-Pro. No matter what you’re towing, the REDARC Tow-Pro has you covered.
The Tow-Pro Elite provides users with the ability to swap between Proportional mode (inertia sensing) for highway driving conditions and User-Controlled mode, popular for off-road driving.
Simple to install, the Tow-Pro Elite is compatible with electric and electric/hydraulic trailer brakes and are AL-KO ESC and Dexter Sway Control System compatible.
Both can be seamlessly mounted in a blank switch panel, an unused area of the dashboard or centre console. This overcomes the possible intrusion of traditional brake controllers into the driver’s leg space and potential interference with lower airbags in newer vehicles.
• Smooth trailer braking response
• AL-KO ESC and Dexter Sway Control System compatible
• Electric or electric/hydraulic operation
• Safe braking at your fingertips
• The main unit is installed out of sight
Suitable For | Most modern vehicles, excluding Ford Ranger and Everest |
Nominal Input System Voltage | 12V |
Nominal Brake Input Signal Voltage | Off - 0V | On - 12V |
Input (Operating) Voltage | 9 - 16VDC |
Brake Coil Voltage | 12V |
Maximum Trailer Axles | 3 |
Nominal Current Draw | 18A |
Max Rated Current | 25A |
Standby Current | < 5mA |
Operating Temperature | -20°C to + 60°C |
Weight | 200g |
Manufacturer | Redarc |
---|